Skip to content
English
metrilus.com
  • There are no suggestions because the search field is empty.

Securing Gram Scales for Transport

Whether moving you s-system on-site or transporting your table to a new site it is of utmost importance to secure the scale for handling.

  1. Remove the cover on the work surface of the table.

S140 table cover

Scale under the cover

2. A screw head can be seen in each corner underneath a bar. The screws should be fully tightened at this point since the system is operational.

Two screws in fully tightened position.

 

3. To secure the system for transport, screw up the four screws in the corners. Tighten them using an open-end wrench.

Before and after: putting the screws from operational mode to transport mode. 

 


4. Put the cover back on top of the scale.

 

To return the scale to operational mode, you can either follow the steps in reverse order or refer to the corresponding article for guidance.